An
executive of Achates Power Inc. has revealed the company has invested $125 million
developing a new two-stroke engine that uses compacted graphite iron (CGI) for its highly-stressed cylinder block.
What is the future for,
and of the automobile? The US Society of Automotive Analysts (SAA) attempted to
find answers to that question last month at the appropriately named ‘The Gem
Theatre’ in Detroit, a city which has undergone serious structural changes
following the decline of the motor industry in motown.
The
SAA suggests that for the automotive industry it is not ‘business as usual’. That outside forces, new technologies and new
entrants into the industry are forcing OEMs and suppliers to rethink how they
do business.
Among
‘new’ technologies unfurled at The Gem was the opposed-piston engine from Michigan-based Achates Power Inc. But this is not so much a ‘new’ technology as an up-to-dated
variation of an old theme, as indicated by David Johnson, president and chief
executive officer of Achates Power when he put up a slide of a Napier Deltic
engine of 1960 vintage – 50 years ago. The German Luftwaffe (air force) used Junkers' two-stroke, opposed-piston technology in World War 2 aircraft!
Johnson,
before revealing a few details of his ‘new’ engine gave some pointers regarding
new technologies. As to electric vehicles he suggested that the heaviest
vehicles are unlikely to be battery-powered; that for electric vehicles ‘cruising
distances are so short and charging times so long that they will need new
battery technology’; and that batteries ‘cost too much and take up so much
space’.
He
added that fuel efficient technologies being developed by the automakers are
not being taken up by consumers, yet as vehicles last longer fuel efficiency
will become even more important. He added that huge expense is being directed to
develop electric and hydrogen fuel cell vehicles, whereas in places like
India, electricity (meaning electric vehicles) is not going to work.
As to
the Achates opposed-piston two-stroke, Johnson claims the engine is 34 per cent
lighter and could cost 12 per cent less than a conventional reciprocating
engine.
According
to Johnson, Achates Power has invested $125 million on developing the engine
since 2004. There was no mention in his talk however of one partner – Cummins Inc.
– and a Department of Energy research programme.
Johnson
claims also that dynamometer hours now total over 7,000 and tests show
the engine to be 60 per cent more efficient than a gasoline engine and 20 per
cent more efficient that a diesel.
“We
have the data to show this,” Johnson told his audience.
He
claims measured tests show that a 4.9-litre engine has a best-point thermal efficiency (BTE) of 44 per
cent. As to oil consumption, one notorious drawback of
earlier two-stroke engines, Johnson pointed to a figure of 0.1 per cent fuel
specific oil consumption.
From
an engineering viewpoint Achates Power, like other developers of this type of
engine, are using compacted graphite iron (CGI) to gain cylinder block
strength.
Engineers
have noted in a paper on Multi-Cylinder
Modular Development Engine that “the A48-3-16 shares most of the power
cylinder with the A48-1 and in an effort to reduce the development schedule,
many components are compatible. Similar to the A48-1, the A48-3-16 is designed
for a peak cylinder pressure of 200 bar with overload conditions of 220
bar. The block was cast from compacted graphite iron (CGI)”.
Just
when the Achates Power opposed-piston engine rolls onto the production line
remains to be seen. But developers have to have deep pockets and long
timescales for new technologies like this.
As we
have seen from promises made in China in recent years, opposed-piston engines
can take longer to emerge than first planned. And, as development of the Wankel engine has proved, some new engine technologies take a long time to evolve - and some never make it at all.
It is 60 years since the Wankel emerged at the Frankfurt Motor Show; almost the same length of time since the first UK automotive gas turbine took to the roads, and automotive Stirling engines were being proclaimed in the US. History has shown that not all roads are paved with gold.
It is 60 years since the Wankel emerged at the Frankfurt Motor Show; almost the same length of time since the first UK automotive gas turbine took to the roads, and automotive Stirling engines were being proclaimed in the US. History has shown that not all roads are paved with gold.
1 comment:
A rumour from a Chinese site http://guba.eastmoney.com/news,000887,246176797.html
Shanghai friends
Posted on 2016-01-29 11:01:24
You are wrong, all the technical approval of the engine have been through, it is to UAV engine development and delayed production, estimated in March to mass production.
says that the EcoMotors engine produced by http://www.zhongdinggroup.com/ will be on the market in March this year after a 16 months delay.
Stay tuned.
Post a Comment